Blastronix delivers high-performing 32-Bit Programmable GPIO PCI serial card

Multiport Media Boards: 32-Bit Programmable GPIO Card

Questions on custom or standard board? Let us know by emailing:
ask-a-question@blastronix.com

Quick Overview

32 Bit Programmable GPIO Card

-No jumpers or switches

-Convenient rack mount interface

-Automatically accepts 5v or 12v inputs

-Outputs configurable for 5v or 12v operation

-Interrupt-driven to reduce host overhead

-32 bits of GPIO that can be programmed as inputs or outputs

-Very robust! Built-in short circuit and transient voltage protection

-50 mA current source and sink capability to drive any type of device

To order:
Call us: (209) 795-0738
Fax us: (209) 795-0646
Email: order-request@blastronix.com
We except VISA, MasterCard, American Express, Discover, COD, & Net 30 accounts upon approval of credit.
Warranty: In most cases, our reliable products carry a lifetime warranty. See below for details.

Highlights

-- Switch between protocols with a mouse click!This means no more pulling cards from the PC.

-- Drivers and API included with full support for Vista, XP, 2000, NT.

-- SMPTE standards.

-- Used in more than half of all broadcast facilities in the U.S. as well as many other countries.

Specifications:

Blastronix products comply with certifications such as RoHs, Weee, and SMPTE. Please inquire for details.

General Purpose Input/Output Specifications:

INPUT Specifications

• a. Vin(max) = 12.4 Volts (Absolute Maximum Rating)
• b. Vin(min) = -0.2 Volts ((Absolute Maximum Rating)
• c. VIL(max) = 0.8 Volts, IIL = 0.5mA sink current max
• d. VIH(min) = 2.1 Volts, IIH = 1.4mA source current max
• e. Input Low Pass Filter -3db at -9.1kHz

OUTPUT Specifications

Isource(max) = 50mA per channel: VOH(min) = 4.0v for 5v configuration; VOH(min) = 11.0v for 12v configuration
Isink(max) = 50mA per channel: VOH(max) = 0.4v

With the Output configured as a 12 Volt "High" (Source) Output:

• VOH > 11.4 Volts with IOH = OmA
• VOH > 11.3 Volts with IOH = 1OmA
• VOH > 11.2 Volts with IOH = 25mA
• VOH > 11.0 Volts with IOH = 5OmA

With the Output configured as a 5 Volt "High" (Source) Output:

• VOH > 4.4 Volts with IOH = OmA
• VOH > 4.3 Volts with IOH = 1OmA
• VOH > 4.2 Volts with IOH = 25mA
• VOH > 4.0 Volts with IOH = 5OmA

With the Output configured as a "Low" (Sink) Output:

• VOH < 0.1 Volts with IOL = OmA
• VOH < 0.2 Volts with IOL = 1OmA
• VOH < 0.3 Volts with IOL = 25mA
• VOH < 0.4 Volts with IOL = 5OmA

Warranty

Because our products are so reliable, Blastronix confidently offers warranties on all our products. In most cases, our serial boards are warranted against manufacturing and production defects in function and workmanship for life. In the case of product malfunction due to damage by a third-party (including acts of God) and not due to manufacturing workmanship is not covered under warranty. Please inquire for more details.